When Do You Need to Change the Industrial Shredder Blades
For an industrial shredder, the frequency of blade replacement is affected by many factors, such as different processed materials, blade materials, or different working intensities. After selecting the appropriate tool settings and material conditions, the blades usually need to be sharpened or replaced when processing 5,000 to 8,000 tons.
1. The Blades of An Industrial Shredder Need to Be Sharpened or Replaced in Time
When the energy consumption of the machine tool increases significantly.
When the alloy blade wear reaches 0.2mm.
When there is a clear notch on the edge of the cutting material.
When the quality of the shredder blade no longer meets the requirements.
2. 4 Points to Extend the Lifespan of The Industrial Shredder
Choose The Right Blades
Choose the right blade and choose the right blade design and material according to the material characteristics.
Working Environment
The use environment, material characteristics, and working environment affect blade wear, and outdoor operations should be well-maintained.
Regular Inspection and Repair
Regularly check the blade wear and repair the worn blade in time to extend the service life.
Cleaning and Maintenance
Cleaning and maintenance, check the wear of accessories after the work is completed, and add lubricating oil in time.
3. Recommendations For Changing New Blades
In the later maintenance of the shredder, the most important thing is the replacement of the blade. When replacing the blade and maintaining the chassis, it is difficult to disassemble the integral bearing plate. It is recommended to choose a split bearing plate for local maintenance. If the integral bearing plate cannot be disassembled, the only solution is to cut off the bearing and buy a new one, but this method is not cost-effective.
The integral bearing plate is difficult to disassemble, and it is recommended to choose a split bearing plate for local maintenance. The integral bearing plate is difficult to disassemble, and the only solution is to cut off the bearing and buy a new one.
