Shredder Services to Troubleshoot Common Shredder Problems
Shredder services are important for maintenance and changing blades. Below are common industrial shredders' problems and solutions. We also take the paper shredder as an example. The blades are the heart of the industrial shredders. If your shredders have any problems, please consult us. Thank you.
It can solve the practical problems of these industries. The material enters the shredder box through the feeding system. The box is equipped with shredder blades. The material is torn into small pieces by the shredder blades, which are then discharged from the bottom of the box. Save costs and improve work efficiency. In order to ensure the production efficiency of the shredder, avoiding failures is a good way. So, how do you ensure the normal use of the shredder?
1. 4 Common Problems of Industrial Shredders
The material accumulates in the crushing chamber and causes a blockage. In this case, it is recommended to correctly adjust the conveying speed of the feeder and discharge the material reasonably and effectively.
The blade is broken or severely worn, or the blade falls off. When the material crushing degree is low or cannot be crushed normally, the material blocks the screen hole, causing the plastic crusher to fail to work properly. In this case, it is necessary to unpack and check the operation of the blade and the knife shaft, replace or readjust the gap between the moving knife and the fixed knife, clean the material blocked by the screen, and restart the machine.
When the shredder's main shaft is running, there is a noise. The reason is mostly that the main shaft is loose and the elastic ring is worn. It is necessary to stop the operation and tighten the pin nut to replace the elastic ring.
Whether the shredder equipment can work normally and smoothly, its daily maintenance and care are particularly important. Although it cannot avoid the failure of the plastic shredder, the failure rate can be reduced to a minimum.
Timely inspection and cleaning. After work every day, the machine should be cleaned on time. Check the looseness of the screws and the wear of easily worn parts such as claws and screens.
2. Cases of Paper Shredders
1. Fault Phenomenon
After turning on the machine, the paper cannot be unloaded, and reversing has no effect. The torn paper is in long strips.
2. Cause Analysis
The blade and the spacer are installed incorrectly. The gap affects the size of the shredding, the wear of the blade causes the gap to become larger, and the R angle is not tangent, which will also affect the shredding effect.
3. Solution
Analysis of the causes of second-hand shredder failures, including incorrect installation of blades and spacers, gap affecting shredding size, blade wear causing the gap to increase, and the R angle, not tangent. The solution is to ensure that the blades and spacers are correctly installed, maintain appropriate gaps, and ensure that the R angles are tangent.
